Removing The Battery Pack; Switching The Timecode Input/Output; Using An Hxr-Ifr5 And Axs-R5; Connecting The Hxr-Ifr5 To The Camcorder - Sony PXW-FS7 Operating Instructions Manual

Removing the Battery Pack

Pull the battery pack out from the battery pack
attachment on the XDCA-FS7 while holding
down the BATT RELEASE button.
Switching the Timecode Input/
Output
You can switch the timecode input/output using
the TC IN/OUT switch (page 12).
For details, see page 91.
Using an HXR-IFR5 and
AXS-R5
You can record RAW video (page 46) to an
AXS-R5 RAW Recorder (option) using an HXR-
IFR5 Interface Unit (option) and an XDCA-FS7.
For details about setting up the HXR-IFR5 and
AXS-R5, refer to the HXR-IFR5 operation
manual.
Connecting the HXR-IFR5 to the
Camcorder
1
Attach the XDCA-FS7 to the camcorder
(page 29).
2
Connect the RAW OUT connector of
the XDCA-FS7 to the SDI IN (RAW)
connector of the HXR-IFR5 using an
SDI cable.

Removing the HXR-IFR5

Disconnect the SDI cable from the RAW
OUT connector of the XDCA-FS7.
31
HXR-IFR5
SDI cable
AXS-R5