Specifying Time Data - Sony PXW-FS7 Operating Instructions Manual

Adjusting the audio recording level
automatically
Set the CH1/CH2 (AUTO/MAN) switches for the
channels to adjust automatically to "AUTO."
Adjusting the audio recording level
manually
Use the following procedure to adjust the audio
recording level.
1
Set the CH1/CH2 (AUTO/MAN)
switches for the channels to adjust
manually to "MAN."
2
During shooting or standby, turn the
AUDIO LEVEL (CH1)/(CH2) dials of
the corresponding channels to adjust
the audio level.
You can also adjust the recording level using
the assignable dial (page 42) if assigned with
the Audio Input Level function, or from the
setup menu.
Notes
• If Audio Input >CH1 Level and CH2 Level in the
Audio menu are both set to "Side," Audio Input
Level in the menu is disabled as there is no target
for the Audio Input Level setting. In this case, an
assignable dial with Audio Input Level assigned
also cannot be used to adjust the audio level.
• If Audio Input >CH1 Level or CH2 Level in the
Audio menu is set to "Lvl + Side," the adjustment
value is the product of the Audio Input Level
setting and the level set by the AUDIO LEVEL
dial. If either level is set to the minimum value,
the audio is muted. If both levels are set to the
maximum value, the maximum level is selected.

Specifying Time Data

Setting the timecode
Set the timecode to record using Timecode
(page 76) in the TC/UB menu.
Displaying time data
Press the DISPLAY button to display time data
on the screen (page 14).
Set the timecode to display using TC Display
(page 76) >Display Select in the TC/UB menu.
Pressing an assignable button (page 42) with
DURATION/TC/U-BIT assigned will switch the
display between the timecode, user bits, and
duration in sequence.
41