Siemens SISTORE AX Installation Instructions Manual page 27

NOTE
In order for the additional hard disk unit to be addressed by the SISTORE AX application software, it must be
identified as an additional data disk in the „System" configuration menu and be formatted
Siemens Building Technologies
Fire Safety & Security Products
Installation and replacement of hard disk drives
The new hard disk capacity will be
displayed in the OSD menu "Storage
information". Before you can start
recording data, the use needs to be
defined and the hard disk to be formatted
(see SISTORE AX8/AX16 500/200 User
Manual).
27
03.2009