Siemens SISTORE AX Installation Instructions Manual page 20

Installation and replacement of hard disk drives
20
Siemens Building Technologies
Fire Safety & Security Products
7. Remove the primary HDD and fit the
replacement hard disk unit into the
frame, and secure using the four
screws.
IMPORTANT:
Ensure the copper grounding strap is re-
installed as shown.
8. Secure the hard disk frame including
the hard disk unit in the SISTORE using
the two screws.
9. Now close the SISTORE AX with the
cover, and secure this by inserting and
tightening the previously removed
screws.
You can now start up the SISTORE AX.
03.2009