Kenwood KDC-719 Instruction Manual page 13

4 Select the character type
Press the I)II] button.
Each time the button &pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5 Select the characters
Press the [FM1 or [AMI button.
@
Characters can be entered by usrng a remote wcth a number
buttons.
Example. If "DANCE" is entered.
Character
Button
#Times pressed
"D"
I#31
1
"A"
WI 1
"N" W61 2
"C"
WI
3
"E" [#31 2
6
Repeat steps 3 through 5 and enter the name.
@
l
When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
l
Memory numbers
FM: 32 stations
- AM: 16 stations
Internal CD player: 30 drscs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
l
The title of station/CD can be changed by the same operation
used to name it.
- Switch@@ the display mode.
Press the [DISPI button.
Each time the button is pressed the Display mode switches as
shown below.
Display mode
Display
Upper and lower division display type
"Display Type A"
Type that mainly uses the display upper part "Display Type B"
Full screen display type
"Display Type C"
(2.
l
The drsplay of each part can be changed.
Swrtchrng Upper and Lower Part Display: (page 14)
- Swrtching Full Screen Display. (page 13)
l
"Drsplay Type C" can't be selected rn "ALL OFF".
7 Exit name set mode
Press the [NAMES] button.
- 13
Switching the Full screen display.
Press the [S.A] button.
Each time the button is pressed the display switches as shown
below.
Information
Demonstration
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Spectrum Analyzer 4
Spectrum Analyzer 5
@
Full Screen display can be selected when "Display Type C" is
selected rn <Display Mode Switchrng> (page 13).