Maintenance Instructions Pages - Yard Machines MTD599 Operator's Manual

Cordless grass trimmer

Table of Contents

For Parts Call 606-678-9623 or 606-561-4983

SWEEPING - DO NOT SWEEP WITH TRIMMER

(Fig. 15)

10. DO NOT BUMP TRIMMER ON CONCRETE. This

can damage the stringhead (Fig. 16).

Fig. 15

REPLACE THE SPOOL OF NYLON LINE

Unplug the trimmer.

Remove the spool assembly from the trimmer. To do

so, hold the outer ribbed part of the assembly with

one hand, while pushing down and turning the spool

head with the other to unlock it. (Fig. 17 & Fig. 18) The

spool carrier and spool will now disassemble easily.

NOTE: There is a spring inside the spool head that

could easily be lost. Ensure that it is put in a safe

place.

Fig. 17

OPERATING INSTRUCTIONS

MAINTENANCE INSTRUCTIONS

www.mymowerparts.com

Remove the clear plastic line retaining ring. Remove

any existing line from the spool.

Using 0.065" replacement line measure off approxi-

mately 14' of line. Double over the cutter line into two

equal lengths and place loop in slot of the spool

divider (Fig. 19).

Fig. 16

Fig. 18

Fig. 19

Table of Contents