Husqvarna TC 450 Workshop Manual page 173

Hide thumbs Also See for TC 450:

Table of Contents

ENGINE REASSEMBLY

Mount the oil pump (8 Nm-0,8 Kgm-5.8 ft/lb). Mount the oil pump driven gear

and the circlip. Mount the circlip on the auxiliary shaft.

Reassembly of gear shaft

Check the shaft for wear in the gear shift mechanism groove.

Mount the spring and lubricate the shaft with motor oil. Insert the shaft in the

crankcase in order to align the spring to the spring selector pin.

Part. N. 8000 H1344 (10-2009)

Show Quick Links

Chapters

Table of Contents