Husqvarna TC 450 Workshop Manual page 153

7 M14x1 (+LOCTITE 243)
11 M6x1
12 M16x1,5
13 M14x1,5
16 M12x1
17 M6x1 (+LOCTITE 272) - TC, TXC
M5x0,8 (+LOCTITE 272) - TE, SMR
19 M5x0,8 (+LOCTITE 272)
M5x0,8
M6x1
M8x1,25
LUBRICATING POINTS-NOTES
A
B
C
E
G
O
O/G
Part. N. 8000 H1344 (10-2009)
ENGINE REASSEMBLY
Tightening torques
20 Nm- 2 Kgm- 14.5 ft/lb
11 Nm- 1,1 Kgm- 7.9 ft/lb
25 Nm- 2,55 Kgm- 18.4 ft/lb
25 Nm- 2,55 Kgm- 18.4 ft/lb
75 Nm- 7,65 Kgm- 55.3 ft/lb
8 Nm- 0,8 Kgm- 5.8 ft/lb
6 Nm- 0,6 Kgm- 4.3 ft/lb
6 Nm- 0,6 Kgm- 4.3 ft/lb
STANDARD
6 Nm- 0,6 Kgm- 4.3
8 Nm-0,8 Kgm- 5.8
21 Nm- 2,1 Kgm- 15.5
LUBRICANT-INSTRUCTIONS FOR ASSEMBLY
Degrease
Mount with Engine oil
Glue the two half casings by "Loctite 510" (Pianermetic)
Align the stator notch to the notch on the stator cover
Grease WATER RESISTANT
Engine oil
Engine oil or grease WATER RESISTANT
H.5
ft/lb
ft/lb
ft/lb