Labels - Konica Minolta Magicolor 7450 II User Manual

Labels

A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
The face sheet must follow the plain paper specification.
The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Check your application documentation for more information on printing labels.
Capacity
Orientation Tray 1
Driver
Media Type
Weight
Duplexing
Use label sheets that are
Recommended for laser printers
DO NOT use label sheets that
Have labels that easily peel off or have parts of the label already removed
Have backing sheets that have peeled away or have exposed adhesive
92
Tray 1
(Manual Feed
Tray)
Tray 2
Tray 3/4/5
(Manual Feed
Tray)
Tray 2
Tray 3/4/5
Label
64–163 g/m² (17–90 lb)
Not supported
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
Up to 10 label sheets, depending on their
thickness
Up to 50 label sheets, depending on their
thickness
Not supported
Face down
Face up
—
Media Types