Selecting Driver Options/Defaults
(for Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should "declare" the options in the driver.
Windows 7/Vista/Server 2008/Server 2003/XP/2000 (PCL6,
PS)
1
Choose the driver's properties as follows:
–
(Windows 7)
From the Start menu, click Devices and Printers to open the Devices
and Printers directory. Right-click the KONICA MINOLTA mc7450
PCL6 or KONICA MINOLTA mc7450 PS printer icon, and then click
Printing preferences.
–
(Windows Vista/Server 2008)
From the Start menu, choose Control Panel, then Hardware and
Sound, and then Printers to display the Printers directory. Right-click
the KONICA MINOLTA mc7450 PCL6 or KONICA MINOLTA mc7450
PS printer icon and choose Properties.
–
(Windows Server 2003/XP)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
mc7450 PCL6 or KONICA MINOLTA mc7450 PS printer icon and
choose Properties.
–
(Windows 2000)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA mc7450
PCL6 or KONICA MINOLTA mc7450 PS printer icon and choose
Properties.
2
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
3
Select the Configure tab.
4
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
5
Click the Refresh to automatically configure installed options.
Selecting Driver Options/Defaults (for Windows)
The Refresh is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
11