Equalizer Control - Kenwood DNX7120 Instruction Manual

p Adjusts the subwoofer volume.
q Returns to the "Audio Control Menu" screen.
⁄
• If you have increased the volume first, then reduced the
volume using the "Vol. Offset", the sound generated if
you suddenly switch to another source may be extremely
loud.
• You may not set some models of power amp boost to
"+18". See the catalog or instruction manual of power
amplifier.

Equalizer Control

You can setup the equalizer.
1 Display Equalizer Control
Touch
Control Menu" screen (page 86).
2 Display the Equalizer screen
1
2
1 Selects an equalizer curve type.
You can select any of the following
equalizer curves.
• "Natural"
• "Rock"
• "Pops"
• "Easy"
• "Top40"
• "Jazz"
• "User"
⁄
• "User" can be selected after tone adjustment is carried
out. See <Tone Setup> (page 88).
2 Selects items to be adjusted for tone curve
setup.
If turned "Off", only Level can be setup for
tone curves.
3 Displays the Tone curve setup screen. (page
88)
4 Returns to the "Audio Control Menu" screen.
in the "Audio
3
4
English 87