Crossover Network Setup; Dvd Setup - Kenwood DNX7120 Instruction Manual

Crossover Network Setup

You can set a crossover frequency of speakers.
1 Select the speaker to set the crossover
1
1
2
2
3
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
4 Switches to the crossover setup screen.
5 Returns to the "SETUP Menu" screen.
2 Display the Crossover setup screen
3 Set the crossover
6
7
6 Sets the cross over frequency.
When front speaker or rear speaker is
selected in step 1:
High Pass Filter adjustment
When Subwoofer is selected in step 1 :
Low Pass Filter adjustment
7 Sets the sub woofer phase. (Only when
"Subwoofer" is set to "ON" in Audio Setup
and "LPF SUB FREQ" is set to other than
"Through")
8 Returns to the "Audio SETUP" screen.

DVD Setup

You can setup the DVD play.
4
5
8
1 Display the DVD SETUP screen
Touch
Menu" screen (page 62).
2 Setup each item
2
3
4
5
1 Moves to the "DVD SETUP 2" screen.
2 Selects a disc menu language.*
(See <Language Setup>, page 64)
3 Selects a subtitle language.*
(See <Language Setup>, page 64)
4 Selects an audio language.*
(See <Language Setup>, page 64)
5 Sets the dynamic range.*
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen
to the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play
stop mode.
6 Returns to the "SETUP Menu" screen.
in the "SETUP
1
6
1
1
1
1 ( "Wide")
Next page 3
English 63