Sirius/Xm Control (North American Sales Area Only); Functions While Displaying The Control Screen - Kenwood DNX7120 Instruction Manual

SIRIUS/XM Control (North American sales area only)

Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite
radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is
necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.)
• This document uses the SIRIUS display as an example.
Functions While Displaying the Control
Screen
Switches to control screen to use various
functions.
1
5
8
9
7
12
14 15
1 Band display
2 Preset number
3 Channel display
4 Displays information concerning music
being played.
Sirius : Changes the display from Channel
Name, Song Title Name, Artist Name,
Composer Name, to Category Name.
3
2
4
6 5
10 11
13
16 17
XM : Changes the display from Channel
Name, Song Title Name, to Category
Name.
Displays the ID number when Channel 0 is
selected.
Sirius : Displays the SIRIUS ID.
XM : Displays the RADIO ID.
5 Tunes in a station.
6 Switches the band.
7 Switches the button display.
8 Starts or stops Channel Scan (that tunes
channels one after the other).
9 Switches the Seek mode.
SEEK 1: Tunes channels one after the other.
SEEK 2: Selects channels in memory one
after the other.
p Switches the number of lines displayed in
the Information Display.
q Displays the Hands Free screen. (page 51)
w Indicates current Seek mode
e When
to
P1 P6
can recall the channel on memory. For
memory of channel stations, see <Channel
Memory> (page 44) .
r You can tune in by entering the desired
channel number. See <Direct Channel
Search> (page 45)
t You can tune in by specifying the desired
category. See <Channel Search> (page 44)
y Displays the program information screen.
u Displays the external device control
screen. See <External Device Power Supply
Control> (page 47).
buttons appear, you
English 43