Kenwood DNX7120 Instruction Manual page 11

C
Selecting a source
Press it to display the source select screen. Touch the source button to select the source.
Full Source Select screen
1
7
8
9
1
10
Favorite Source Select screen
A
Playing a disc
Removing a disc
Press (Eject) button.
1 Scrolls the source display.
11 2
⁄
3
• The displayed source depends on the type of device
4
connected. In addition, you cannot press the button of
5
currently unavailable source.
6
The following buttons are always displayed on the
10
source select screen and source control screen.
2 Clock display
3 Displays the Source Select screen.
The display switches between Favorite Source Select
screen and Full Source Select screen by touching the
button.
4 Displays Source Control screen.
5 Displays the Audio Control Menu screen. (page 86)
6 Displays the SETUP Menu screen. (page 62)
7 Displays the external device control screen. See
<External Device Power Supply Control> (page 47).
12
8 Changes the screen skin each time it is pressed.
9 Displays the Hands Free screen. (page 51)
p Adjust the volume.
q Press for at least 2 seconds to erase the buttons. Touch
the screen to redisplay the buttons.
⁄
• If a Bluetooth Unit is not connected, [TEL] will not appear.
w Displays the full source screen.
⁄
• For how to register the frequently used source buttons to
Favorite Source Select screen, see <Direct Source Button
Setup> (page 70).
When you load a disc into disc loading slot, the disc starts playing.
If a menu appears, when playing a video disc, select the desired item.
⁄
• See <List of playable discs> (page 7) for a list of supported discs and formats.
English 11