Security Code Setup - Kenwood DNX7120 Instruction Manual

Setup Menu
mode.
"Full", "Just", "Zoom", "Normal"
a Returns to the "SETUP Menu" screen.
⁄
• When you select the Menu or Navigation, the display is
shown in the full-size display mode automatically. The
screen mode of these displays cannot be changed.
• The picture qua¡lity can be set for each source.
Full picture mode ("Full")
Justify picture mode ("Just")
Zoom picture mode ("Zoom")
Normal picture mode ("Normal")
74 DNX7120/DDX712/DDX7032

Security Code Setup

You can set a security code to protect your
receiver system against theft.
⁄
• When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
1 Display the Security Code Setup screen
Touch
Menu" screen (page 62).
1
2
1 Displays the Security code input screen.
2 Turns the SI function on or off.
If turned "On", the burglar alarm lamp
flashes when the vehicle ignition is off.
( "On")
3 Returns to the original screen.
2 Start Security Code setup
⁄
• If you have already completed the code registration,
Clear is displayed.
3 Enter a security Code
Input four-digit number.
in the "SETUP
3