Konica Minolta bizhub 42 Quick Manual page 73

2
% To scan a document that cannot be loaded into the ADF (a thick document or a document on thin
paper), position it on the original glass.
% Insert the document to ADF with the first page upside.
3
Select the destination.
% If fax destinations are already registered, a registered destination can be selected. For details on
registering destinations, refer to page 5-2 of this manual.
% When directly entering the fax number, use the keypad to type in the number.
% A document can be sent to multiple destinations at the same time (Broadcast transmission). For
details on sending a document to multiple destinations, refer to page 5-7 of this manual.
% If necessary, press [Scan Settings], [Comm. Settings] or [Original Settings], and specify the desired
settings. For details, refer to chapter 6 of the [User's Guide Fax Operations].
% Pressing [Mode Check] enables checking and deleting of the destination specified. For details, refer
to chapter 6 of the [User's Guide Fax Operations].
4
Press the [Start] key.
% To scan multiple originals using the original glass, select [Separate Scan]. After scanning 1st page
of the original, load the 2nd page and press [Start] key again. Repeat this process until all the pages
2-10
Basic fax operation 2.3
bizhub 42/36