Registering Special Bluetooth Device; Registering Pin Code; Downloading The Phone Book - Kenwood KCA-BT300 Instruction Manual

Function of Model-A, B, C, D, E, F

Registering Special Bluetooth device

Allow registration of a special device that cannot be
registered normally (pairing).
1
Select the special device registration mode
Select the "SPCL DVC Select"/ "S-DVC SELECT"/
"SDVC SEL" display.
2
Press the decision button for at least 1 second.
3
Select a device name
Operation type
If "Completed"/"Complete" is displayed, registration
of the special device is completed.
4
Go through the procedure of <Registering
Bluetooth device> (page 20) and complete the
registration (pairing).
⁄
• If the device name is not in the list, select "Other Phone".
Function of Model-A, B, C, D, E, F

Registering PIN Code

By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Select the PIN code edit mode
Select the "PIN Code Edit"/ "PIN EDIT" display.
2
Press the decision button for at least 1 second.
3
Input the PIN code
Operation type
4
Register a PIN code
Press the decision button for at least 1 second.
If "Completed"/"Complete" is displayed, registration
is completed.
⁄
• By default, "0000" is specified.
• A PIN code can be specified with up to 8 digits.
Operation
Operation

Downloading the Phone Book

Download the phone book data from the cell-
phone to this unit so that you can use the Phone
Book of this unit.
To download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
☞ Setting on the cell-phone may be required.
☞ If no phone book data is found in the unit even after
the compete display, your cell-phone may not support
automatic download of phone book data. In this case,
try downloading manually.
To download from the cell-phone manually
1
By operating the cell-phone, end the hands-free
connection.
2
By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
During downloading:
"Downloading", "DOWNLOAD", or "Now
Downloading..." is displayed.
After completion of downloading:
"Completed" or "COMPLETE" is displayed.
3
By operating the cell-phone, start the hands-
free connection.
To clear the downloading completion message:
Press any button.
⁄
• For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
• Up to 1000 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type
of characters.)
• To cancel downloading of the phone book data, operate
the cell-phone.
Next page 3
21
|
English