6WXM7 Series Motherboard
•
POWER ON Function
Password
Mouse Move
Mouse Click
BUTTON ONLY
Keyboard 98
•
Onboard FDC Controller
Enabled
Enable onboard FDC port. ( Default value )
Disabled
Disable onboard FDC port.
•
Onboard Serial Port 1
Auto
BIOS will automatically setup the port 1 address. ( Default value )
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8.
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8.
Disabled
Disable onboard Serial port 1.
•
Onboard Serial Port 2
Auto
BIOS will automatically setup the port 2 address. ( Default value )
3F8/IRQ4
Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3
Enable onboard Serial port 2 and address is 2F8.
3E8/IRQ4
Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 2 and address is 2E8.
Disabled
Disable onboard Serial port 2.
•
UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR
Onboard I/O chip supports ASKIR.
IrDA
Onboard I/O chip supports IrDA.
SCR
Onboard I/O chip supports SCR.
Normal
Onboard I/O chip supports Normal. ( Default value )
Enter from 1 to 5 characters to set the Keyboard Power On
Password.
Move the PS/2 Mouse.
Double click on PS/2 mouse left button.
If your keyboard have "POWER Key" button, you can press the
key to power on your system. ( Default value )
Windows 98 keyboard "Power" key.
67