1. Manuals
  2. Brands
  3. Gigabyte Manuals
  4. Motherboard
  5. 6WXM
  6. User manual

Gigabyte 6WXM User Manual

Pentium ii / iii / celeron processor mainboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S MANUAL
1.
System power on by PS/2 Mouse: First, enable this function
in CMOS Setup, then you can power on the system by
double clicking the right or left button of your PS/2 Mouse.
2.
System power on by Keyboard: If your ATX power supply
supports larger than 300 mA 5V Stand-By current (depends
on the specification of keyboards), you can power on your
system by entering password from the Keyboard after
setting the "Keyboard power on" jumper and password in
CMOS Setup.
3.
Support 3 steps ACPI LED selectable.
4.
Support Modem Ring-On (Include internal Modem and
external modem on COM A and COM B).
5.
Support Wake-up On LAN (Your ATX power supply must
support larger than 720 mA 5V Stand-By current).
Pentium
II / III / Celeron Processor MAINBOARD
6WXM
REV. 1.3 First Edition
R-13-01-090827

Advertisement

Table of Contents
loading

Related Manuals for Gigabyte 6WXM

Summary of Contents for Gigabyte 6WXM

  • Page 1 6WXM USER'S MANUAL System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. System power on by Keyboard: If your ATX power supply...
  • Page 3 6WXM The author assumes no responsibility for any errors or omissions that may appear in this document nor does it make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners.
  • Page 4 RATIO is higher than that of CPU. JP6 / JP28: System Bus Speed AC97 JP28 82810/ 82810E JP6 JP28 ICH/ 6WXM 82801 AUTO 1-2 IT8888 Backup Main BIOS BIOS Figure-1 «Note: Please set the CPU host frequency in accordance with your processor’...
  • Page 5 6WXM...
  • Page 6 Quick Installation Guide II. Jumper setting : GN : Green Function Switch AC97 82810/ 82810E PIN No. Function Open Normal Operation ICH/ 6WXM 82801 IT8888 Close Entering Green Mode Backup Main BIOS BIOS GD : Green Function LED AC97 82810/...

  • Page 7: External Speaker

    6WXM HD : IDE Hard Disk Active LED AC97 82810/ 82810E ICH/ 6WXM 82801 PIN No. Function IT8888 LED + Backup Main BIOS BIOS SPKR: External Speaker Connector AC97 82810/ PIN No. Function 82810E External Speaker ICH/ 6WXM 82801 IT8888...
  • Page 8 Quick Installation Guide RES : Reset Switch AC97 PIN No. Function 82810/ 82810E Open Normal Operation ICH/ 6WXM 82801 Short Reset Hardware IT8888 System Backup Main BIOS BIOS P+P P : Power LED Connector (as 3 steps ACPI LED) AC97...
  • Page 9 6WXM PW: Soft Power Connector AC97 82810/ 82810E PIN No. Function ICH/ Open Normal Operation 6WXM 82801 IT8888 Close Power ON/OFF Backup Main BIOS BIOS IR : Infrared Connector (IR / CIR) AC97 Function 82810/ IRRX 82810E IRTX ICH/ 6WXM...
  • Page 10 PS/2 Mouse / Keyboard Connector AC97 PS/2 Mouse PS/2 Mouse/ Keyboard Pin No. Function Data GMCH-E/ VCC(+5V) 82810E Clock ICH/ 6WXM 82801 IT8888 PS/2 Keyboard Backup Main BIOS BIOS USB : USB Port AC97 5 6 7 8 PIN No.
  • Page 11 6WXM CPU FAN : CPU Cooling Fan Power Connector AC97 PIN No. Function +12V SENSE 82810/ 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS POWER FAN : POWER Cooling Fan Power Connector AC97 82810/ 82810E ICH/ PIN No. Function...
  • Page 12 Quick Installation Guide SYSTEM FAN : SYSTEM Cooling Fan Power Connector AC97 82810/ PIN No. Function 82810E ICH/ +12V 6WXM 82801 IT8888 SENSE Backup Main BIOS BIOS IDE1: For Primary IDE port AC97 82810/ 82810E ICH/ 6WXM 82801 IT8888 Backup...
  • Page 13 6WXM IDE2: For Secondary IDE port AC97 82810/ 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS FLOPPY : FLOPPY Port AC97 82810/ 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS...
  • Page 14 ATX POWER : ATX POWER Connector AC97 Pin No. Function 3,5,7,13, 15-17 1,2,11 3.3V 82810/ 82810E 4,6,19,20 VCC +12V ICH/ 6WXM -12V 82801 IT8888 Power Good 5V SB stand by+5V PS-ON(Soft On/Off) Backup Main BIOS BIOS COM B / LPT Port AC97...
  • Page 15 6WXM VGA : VGA Port AC97 82810/ 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS COM A : COM A Port AC97 COM A 82810/ 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS...
  • Page 16 JP13:CLEAR CMOS Function AC97 3 2 1 82810/ PIN No. Function 82810E 1-2 close Clear CMOS ICH/ 2-3 close Normal (Default) 6WXM 82801 IT8888 Backup Main BIOS BIOS JP26 : AMR (JP26 is available when the motherboard use YAMAHA YMF744 Chipset)

  • Page 17: Keyboard Power On

    6WXM JP3 : Keyboard Power On Selection AC97 PIN No. Function Keyboard Power on close Enabled Keyboard Power on close Disabled (Default) 82810/ 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS JP25: USB Wake Up Function AC97 PIN No. Function...
  • Page 18 JP12 1-2close Front Panel USB JP27 1-2close Enable JP12 2-3close Back Panel USB 82810/ JP27 2-3close Enable 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS GAME & AUDIO Port AC97 82810/ 82810E GAME Line Out ICH/ Line In 6WXM...
  • Page 19 6WXM J8: CD Audio Line In AC97 82810/ 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS JP17:AUX_IN AC97 82810/ 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS...
  • Page 20 Quick Installation Guide JP5 TEL :The connector is for Modem with internal voice connector. AC97 PIN No. Function 82810/ Phone-in 82810E ICH/ 6WXM 82801 Phone-out IT8888 Backup Main BIOS BIOS J14: Wake on LAN AC97 82810/ 82810E PIN No. Function...
  • Page 21 6WXM J9 RING PWR ON: Internal Modem Card Ring PWR On AC97 PIN No. Function 82810/ Signal 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS JP4 :Close Function Selection (If you want to use STR Function, please set jumper JP4 Closed.)
  • Page 22 Quick Installation Guide JP1 : STR LED Connector AC97 STR LED Connector GMCH-E/ 82810E External. ICH/ 6WXM 82801 IT8888 STR LED Backup Main BIOS BIOS JP15 : CASE OPEN AC97 JP15 PIN No. Function Signal 82810/ 82810E ICH/ 6WXM 82801...
  • Page 23 6WXM JP9: Top Block Lock AC97 GMCH-E/ PIN No. Function 82810E Open TBL LOCK ICH/ 6WXM Close TBL Unlock(Default). 82801 IT8888 Backup Main BIOS BIOS JP16 :Normal / Safe Mode / Recovery AC97 82810/ 82810E ICH/ PIN No. Function 6WXM...
  • Page 24 JP7: Onboard H/W Audio Function. AC97 PIN No. Function 1-2close Disable H/W Audio 82810/ 82810E 2-3close Enabled H/W Audio (Default) ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS TV/DFP :TV-Out / Digital Flat Panel Daughter card connector. AC97 82810/ 82810E ICH/...
  • Page 25 6WXM YMF 744 :YAHAHA YMF744 (Optional). AC97 YAMAHA Sound Chip 82810/ 82810E ICH/ 6WXM 82801 IT8888 Backup Main BIOS BIOS JP10 : Front Panel USB Port (Optional) AC97 PIN No. Function 1,4,5,10 GMCH-E/ 82810E 3,7,9 USBP0+ ICH/ 6WXM 82801 USBP0-...
  • Page 26 AC97 82810/ PIN No. Function 82810E Open Timeout Reboot Close No Reboot on Timeout ICH/ 6WXM 82801 IT8888 JP11 Backup Main BIOS BIOS JP24: SPDIF(The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dobly Digital decoder.)
  • Page 27 6WXM JP14: Buzzer Enable (Optional) AC97 82810/ 82810E PIN No. Function ICH/ Open Internal Buzzer Disable 6WXM 82801 IT8888 Close Internal Buzzer Enable Buzzer Backup Main BIOS BIOS BAT1:For Battery AC97 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 28 Quick Installation Guide III. Top Performance Test Setting: The following performance data list is the testing results of some popular benchmark testing programs. Users have to modify the value for each item in chipset features as follow For top performance setting. CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Advanced Chipset Features SDRAM CAS Latency Time...
  • Page 29 6WXM These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) Intel Pentium III 500MHz Processor (128x 1) MB SDRAM...
  • Page 30 6WXM IV. Suspend to RAM Installation A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system is able, in just a few seconds, to retrieve the last “ state” of the system before it went to sleep recover to that state.
  • Page 31 Step 2: (If you want to use STR Function, please set jumper JP4 (Closed.) AC97 82810/ 82810E PIN No. Function ICH/ Open STR Disable 6WXM 82801 IT8888 Close STR Enable Backup Main BIOS BIOS Step 3: Power on the computer and as soon as memory counting starts, press <Del>.
  • Page 32 6WXM A.3 How to put your system into STR mode? There are two ways to accomplish this: Choose the “ Stand by” item in the “ Shut Down Windows” area. A. Press the “ Start” button and then select “ Shut Down”...
  • Page 33 Suspend To RAM Installation Define the system ” power on” button to initiate STR sleep mode: A. Double click “ My Computer” and then “ Control Panel” B. Double click the “ Power Management” item.
  • Page 34 6WXM C. Select the “ Advanced” tab and “ Standby” mode in Power Buttons. Step 4: Restart your computer to complete setup. Now when you want to enter STR sleep mode, just momentarily press the “ Power on” button.. A.4 How to recover from the STR sleep mode? There are six ways to “...
  • Page 35 Suspend To RAM Installation...
  • Page 36 6WXM A.5 Notices : In order for STR to function properly, several hardware and software requirements must be satisfied: Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720 mA 5V Stand-By current). B. Your SDRAM must be PC-100 compliant.
  • Page 38 6WXM V. Introduce Dual BIOS (Optional) A. What is Dual BIOS Technology? Dual BIOS means that there are two system BIOS (ROM) on the motherboard, one is the Main BIOS and the other is Backup BIOS. Under the normal circumstances, the system works on the Main BIOS. If the Main BIOS is corrupted or damaged, the Backup BIOS can take over while the system is powered on.
  • Page 39 Introduce Dual BIOS b. Dual BIOS Utility Dual BIOS Utility V6.60.g.01K (C) 1999, Gigabyte Technology Co., LTD. Wide Range Protection :Disabled Halt On BIOS Defects :Disabled Auto Recovery :Enabled Boot From :Main BIOS BIOS Recovery :Main to Backup F3: Load Default...
  • Page 40 6WXM Halt On BIOS Defects : Disabled(Default), Enabled If the BIOS occurs a checksum error or the Main BIOS occurs a WIDE RANGE PROTECTION error and Halt On BIOS Defects set to Enable, the PC will show messages on the boot screen, and the system will pause and wait for the user’...
  • Page 41 DualBIOS Technology FAQ GIGABYTE Technology is pleased to introduce DualBIOS technology, a hot spare for your system BIOS. This newest “ Value-added” feature, in a long series of innovations from GIGABYTE, is available on GA-6WXM motherboard. Future GIGABYTE motherboards will also incorporate this innovation.
  • Page 42 6WXM I. Q: What is DualBIOS technology? Answer: DualBIOS technology is a patented technology from Giga-Byte Technology. The concept of this technology is based on the redundancy and fault tolerance theory. DualBIOS technology simply means there are two system BIOSes (ROM) integrated onto the motherboard. One is a main BIOS, and the other is a backup BIOS.
  • Page 43 Introduce Dual BIOS due to above reasons. This new technology will eliminate valuable system down time and costly repair bills cause by BIOS failures. III. Q: How does DualBIOS technology work? Answer: 1. DualBIOS technology provides a wide range of protection during the boot up procedure.
  • Page 44 6WXM DualBIOS utility may be entered to manually change the boot sequence to boot from the backup BIOS. 2. During or after a BIOS upgrade, if DualBIOS detects that the main BIOS is corrupt, the backup BIOS will take over the boot-up process automatically.

  • Page 46: Table Of Contents

    Table of Contents TABLE OF CONTENTS INTRODUCTION 1.1. PREFACE......................1-1 1.2. KEY FEATURES ....................1-1 1.3. PERFORMANCE LIST..................1-2 1.4. BLOCK DIAGRAM....................1-3 1.5. INTRODUCE THE PENTIUM II / III PROCESSORS ........1-4 1.6. INTERDUCE AMR ....................1-5 SPECIFICATION 2.1. HARDWARE ....................... 2-1 2.2.
  • Page 47 6WXM 3.10. IDE & ATAPI DEVICE INSTALLATION ............3-9 3.11. PERIPHERAL DEVICE INSTALLATION ............3-9 3.12. KEYBOARD & PS/2 MOUSE INSTALLATION..........3-9 BIOS CONFIGURATION 4.1. ENTERING SETUP..................... 4-1 4.2. CONTROL KEYS ....................4-1 4.3. GETTING HELP ....................4-2 4.3.1. Main Menu ....................4-2 4.3.2.

  • Page 48: Introduction

    Introduction 1. INTRODUCTION 1.1. PREFACE Welcome to use the 6WXM motherboard. It is a Pentium II / III / Celeron Processor based PC / AT compatible system with PCI / ISA Bus, and has been designed to be the fastest PC / AT system. There are some new features allow you to operate the system with just the performance you want.
  • Page 49 6WXM 30.3 cm x 19.0 cm ATX SIZE form factor, 4 layers PCB.

  • Page 50: Performance List

    Introduction 1.3. PERFORMANCE LIST The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) Intel Pentium III 500MHz Processor...

  • Page 51: Block Diagram

    6WXM 1.4. BLOCK DIAGRAM 66 / 100 MHz 14.318MHz 3.3V EDO/SDRAM Slot 1 DIMM Sockets Host Bus INTEL DRAM Bus Display cache FW82810 Memory 4MB (GMCH) PCI to ISA Bridge IT8888 14.318MHz ISA Bus 100MHz 66MHz ICS 9248-73 33MHz / ICS 9248-...
  • Page 52 Introduction 1.5. INTRODUCE THE Pentium II / III Processors Figure 1: Universal Retention Mechanism & attach Mount Figure 2:OEM Pentium II Processor...
  • Page 53 6WXM Figure 3: OEM Pentium III Processor 1.6 INTRODUCE AMR The Audio Modem Riser (AMR) is a new port that supports both audio and modem. The main purpose of the AMR port is to provide lower cost and higher levels of integration at all levels of the PC platform.

  • Page 54: Specification

    6WXM 2. SPECIFICATION 2.1. HARDWARE Pentium II/III/Celeron processor. 242 pins 66 / 100 MHz slot1 on board. Speaker Alarm when detect "CPU FAN Failure" or PROTECTION “ CPU Overheat” . Automatically slow down CPU speed when "CPU Overheat". H/W monitor power status ( 5V, 12V, VGTL,5VSB, CPU voltage &...

  • Page 55: Software

    Specification Supports 2 16550 COM ports. I/O PORTS Supports 1 EPP/ECP LPT port. Supports 1 1.44/2.88 MB Floppy port. Supports 2 USB ports. Supports PS/2 Mouse & Keyboard. 1x Line in Audio Ports 1x Line out 1x Mic in 1x Game Port 1x CD Line in 1x TEL 1x AUX_IN...
  • Page 56 Introduction Electricity 4.75 V to 5.25 V. (Max. 20A current at 5V.)

  • Page 58: Hardware Installation

    HARDWARE INSTALLATION 3.1. UNPACKING The main board package should contain the following: The 6WXM main board. USER'S MANUAL for main board. Cable set for IDE, Floppy devices, COM Ports.(COMB Cable-optional) CD for main board Utility. [IUCD (Bus Master + Sound Driver + LDCM + Utility), INTEL 82810/82810E Driver.]...

  • Page 59: Main Board Layout

    LINE JP12 CPU FAN COM B JP27 JP15 SPDIF JP25 JP10 SLOT 1 82810/ 82810E JP28 ICH/ Power FAN 6WXM 82801 IT8888 BANK 0 JP13 JP16 BANK 1 JP11 BZ 1 ATX PWR IDE 2 Backup Main BIOS BIOS IDE 1 FLOPPY ×Figure 3.1Ø...
  • Page 60 6WXM IR : INFRARED Connector (IR / CIR) Pin No. Function IRRX IRTX CIRRX CIRTX CPU FAN : CPU cooling FAN Power Connector Pin No. Function GND. +12V SENSE PWR FAN: Power FAN Connector Pin No. Function GND. +12V SENSE SYS FAN: System FAN Connector Pin No.
  • Page 61 Hardware Installation J9 RING PWR ON :Internal Modem Card Ring PWR On Pin No. Function Signal JP3 : Keyboard Power On Selection Pin No. Function 1-2 Close Enabled Keyboard power on. 2-3 Close Disabled Keyboard power on(Default). JP25 : USB Wake Up Function Pin No.
  • Page 62 6WXM J14:Wake on LAN Pin No. Function 5VSB Signal TEL : The connector for Modem with internal voice connector. Pin No. Function Phone-in Phone-out JP4:STR Enable Pin No. Function Open STR Disable Close STR Enable JP15 : Case Open Pin No.
  • Page 63 Hardware Installation JP10 : Front Panel USB Port Pin No. Function 1,4,5,10 3,7,9 USBP0+ USBP0- JP11 :Timeout Reboot Function Pin No. Function Open Timeout Reboot Close No Reboot on Timeout J13 : For 2X11 PINs Jumper PW P+P P SPKR Soft PWR: Soft Power Connector Open: Normal Operation Short: Power On/Off...

  • Page 64: Dram Installation

    6WXM SPKR: Speaker Connector PIN 1 : VCC (+) PIN 2 : NC PIN 3 : NC PIN 4 : Data ( ) HD: IDE Hard Disk Active LED PIN 1: LED anode (+) PIN 2: LED cathode ( )

  • Page 65: Cpu Speed Setup

    The system bus frequency can be switched between 66, 100 MHz by adjusting JP6 & JP28 (See Figure-1). The CPU Frequency is control by BIOS. JP6 / JP28: System Bus Speed AC97 JP28 GMCH-E/ 82810E ICH/ JP6 JP28 6WXM 82801 IT8888 AUTO 1-2 Backup Main BIOS BIOS Figure-1 «...

  • Page 66: Speaker Connector Installation

    6WXM internal battery is 5 years, the user can change a new Battery to replace old one after it cannot work. M Danger of explosion if battery is incorrectly replaced. M Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 67 Hardware Installation everything again, and ready power-on the system. 3-10...

  • Page 68: Bios Configuration

    BIOS Configuration 4.BIOS CONFIGURATION Award's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery- backed CMOS SRAM so that it retains the Setup information when the power is turned off.

  • Page 69: Getting Help

    6WXM 4.3. GETTING HELP 4.3.1. Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. 4.3.2. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.

  • Page 70: Advanced Bios Features

    BIOS Configuration Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award special enhanced features. Advanced Chipset Features This setup page includes all the items of chipset special features. Integrated Peripherals This setup page includes all onboard peripherals.
  • Page 71 6WXM Set User password Change, set, or disable password. It allows you to limit access to the system. Save & Exit Setup Save CMOS value settings to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup.
  • Page 72 BIOS Configuration 4.5. STANDARD CMOS FEATURES MENU The items in Standard CMOS Setup Menu (Figure 4.2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item.
  • Page 73 6WXM Date The date format is <day>, <month> <date> <year>. The day, from Sun to Sat, determined by the BIOS and is display-only month The month, Jan. Through Dec. date The date, from 1 to 31 (or the maximum allowed in the...
  • Page 74 BIOS Configuration Drive A type / Drive B type The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. None No floppy drive installed 360K, 5.25 in. 5.25 inch PC-type standard drive; 360K byte capacity. 1.2M, 5.25 in.
  • Page 75 6WXM Halt on The category determines whether the computer will stop if an error is detected during power up. NO Errors The system boot will not stop for any error that may be detected and you will be prompted All Errors...
  • Page 76 BIOS Configuration 4.6. Advanced BIOS Features CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Advanced BIOS Features Virus Warning Disabled Item Help CPU cache Enabled Menu Level 4 CPU L2 Cache ECC Checking Disabled Processor Number Feature Enabled Allows you to Quick Power On Self Test Enabled choose the VIRUS...
  • Page 77 6WXM CPU cache These two categories speed up memory access. However, it depends on CPU / chipset design. The default value is Enabled. Enabled Enable cache Disabled Disable cache CPU L2 Cache ECC Checking The default value is Disabled. Enabled...
  • Page 78 BIOS Configuration Boot other device The default value is Enabled Enabled Enabled select your boot device priority function Disabled Disabled this function Swap Floppy Drive The default value is Disabled. Enabled Floppy A & B will be swapped under DOS. Disabled Floppy A &...
  • Page 79 6WXM Typematic Rate Setting The default value is Disabled. Enabled Enable Keyboard Typematic rate setting. Disabled Disable Keyboard Typematic rate setting. Typematic Rate (Chars / Sec.) The default value is 6. 6-30 Set the maximum Typematic rate from 6 chars. Per second to 30 characters.
  • Page 80 BIOS Configuration Report No FDD For WIN 95 The default value is No. Assign IRQ6 For FDD. FDD Detect IRQ6 Automatically. 4.7. Advanced Chipset Features CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Advanced Chipset Features SDRAM CAS Latency Time Item Help SDRAM Cycle Time Tras/Trc Menu Level 4...
  • Page 81 6WXM SDRAM Cycle Time Tras/Trc The default value is 5/7 Set DRAM Tras/Trc Cycle time is 6/8 SCLKs. Set DRAM Tras/Trc Cycle time is 5/7 SCLKs. SDRAM RAS# to CAS# delay The default value is 2 Set SDRAM RAS# to CAS# delay 3 SCLKs.
  • Page 82 BIOS Configuration Delayed Transaction The default value is Disabled. Disabled Normal operation. Enabled For slow speed ISA device in system. On-Chip Video Window Size The default value is 64MB. 32MB Set Graphics Aperture Size to 32MB. 64MB Set Graphics Aperture Size to 64MB. Disabled Disabled this function.

  • Page 83: Integrated Peripherals

    6WXM 4.8. Integrated Peripherals CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Integrated Peripherals On-Chip Primary PCI IDE Enabled Item Help On-Chip Secondary PCI IDE Enabled Menu Level 4 IDE Primary Master PIO Auto IDE Primary Slave PIO Auto IDE Secondary Master PIO...
  • Page 84 BIOS Configuration On-Chip Primary PCI IDE The default value is Enabled. Enabled Enable onboard 1st channel IDE port. Disabled Disable onboard 1st channel IDE port. On-Chip Secondary PCI IDE The default value is Enabled. Enabled Enable onboard 2nd channel IDE port. Disabled Disable onboard 2nd channel IDE port.
  • Page 85 6WXM IDE Secondary Slave PIO (for onboard IDE 2nd channel). The default value is Auto. Auto BIOS will automatically detect the IDE HDD Accessing mode. Mode0~4 Manually set the IDE Accessing mode. IDE Primary Master UDMA. The default value is Auto.
  • Page 86 BIOS Configuration USB Controller The default value is Enabled. Enabled Enable USB Controller. Disabled Disable USB Controller. USB Keyboard Support The default value is Disabled. Enabled Enable USB Keyboard Support. Disabled Disable USB Keyboard Support. Init Display First The default value is PCI Slot. PCI Slot Set Init Display First to PCI Slot.
  • Page 87 6WXM POWER ON Function The default value is BUTTON ONLY. Password Enter from 1 to 5 characters to set the Keyboard Power On Password. Mouse Move Move the PS/2 mouse. Mouse Click Double click twice on PS/2 mouse. BUTTON ONLY If your keyboard have “POWER Key”...
  • Page 88 BIOS Configuration Onboard Serial Port 2 The default value is Auto. Auto BIOS will automatically setup the port 2 address. 3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8. 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8. 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8.
  • Page 89 6WXM ECP Mode Use DMA The default value is 3. Set ECP Mode Use DMA is 1. Set ECP Mode Use DMA is 3. Game Port Address The default value is Disabled. Disabled Disabled On Board IDE Set onboard game port is 201.

  • Page 90: Power Management Setup

    BIOS Configuration 4.9. POWER MANAGEMENT SETUP CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Power Management Setup ACPI Suspend Type S1(PowerOnSu Item Help spend) Power Management User Define Menu Level 4 Video Off Method DPMS Video Off In Suspend Suspend Type Stop Grant MODEM Use IRQ Suspend Mode...
  • Page 91 6WXM Power Management The default value is User Define. User Define For configuring our own power management features. Min Saving Enable Green function. Max Saving Disable Green function. Video off Method The default value is DPMS. V/H SYNC+Blank BIOS will turn off V/H-SYNC when gets into Green mode for Green monitor power saving.
  • Page 92 BIOS Configuration Suspend Mode The default value is Disable. Disabled Disable Suspend Mode. 1 min - 1 Hour Setup the timer to enter Suspend Mode. HDD Power Down The default value is Disable. Disable Disable HDD Power Down mode function. 1-15 mins.
  • Page 93 6WXM ModemRingOn / WakeOnLan The default value is Enabled. Disabled Disable these functions. Enabled Enable these functions. USB Mouse Wake From S3 The default value is Disabled. Disabled Disable USB Mouse Wake From S3. Enabled Enable USB Mouse Wake From S3.
  • Page 94 BIOS Configuration Resume by Alarm The default value is Disabled. Disabled Disable this function. Enabled Enable alarm function to POWER ON system. If the default value is Enabled. Date ( of Month) Alarm : 0~31 Time ( hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) Primary IDE 0/1 The default value is Disabled.

  • Page 95: Pnp/Pci Configuration

    6WXM 4.10. PnP/PCI Configurations CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software PnP/PCI Configurations PNP OS Installed Item Help Reset Configuration Data Disabled Menu Level 4 Resources Controlled By Auto (ESCD) * IRQ Resources Press Enter Select Yes if you...
  • Page 96 BIOS Configuration Resources Controlled by The default value is Auto (ESCD) Manual User can set the PnP resource (I/O Address, IRQ & DMA channels) used by legacy ISA DEVICE. Auto BIOS automatically use these PnP rescuers. IRQ (3,4,5,7,9, 10,11,12,14,15),DMA(0,1,3,5,6,7) assigned to The default value is "Legacy ISA"...

  • Page 97: Pc Health Status

    6WXM 4.11. PC Health Status CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software PC Health Status Reset Case Open Status Disabled Item Help Case Opened Menu Level 4 VCORE 2.01 V VGTL 1.48 V VCC3 3.45 V + 5V 5.02 V +12V 12.16 V...
  • Page 98 BIOS Configuration CPU Temperature Select ( C / F) The default value is 75 C /167 F 65 C / 149 F Monitor CPU Temp. at 65 C / 149 F 70 C / 158 F Monitor CPU Temp. at 70 C / 158 F 75 C / 167 F Monitor CPU Temp.

  • Page 99: Frequency/Voltage Control

    6WXM 4.12. Frequency/Voltage Control CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Frequency/Voltage Control Auto Detect DIMM/PCI Clk Enabled Item Help Spread Spectrum Disabled Menu Level 4 CPU Type Pentium III Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 4.9: Frequency/Voltage Control...
  • Page 100 BIOS Configuration CPU Type Pentium III (CPU type is depend on your CPU) 1. System Bus Speed :66MHz 200 / 233 / 266 / 300 / 333 / 366 / 400 / 433 / 466 / 500 / 533 2. System Bus Speed : 100MHz 300 / 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 / 750 / 800 4-33...

  • Page 101: Load Fail-Safe Defaults

    6WXM 4.13. Load Fail-Safe Defaults CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software 4Standard CMOS Features 4Frequency/Voltage Control 4Advanced BIOS Features Load Fail-Safe Defaults 4Advanced Chipset Features Load Optimized Defaults 4Integrated Peripherals Set Supervisor Password 4Power Management Setup Set User Password...

  • Page 102: Load Optimized Defaults

    BIOS Configuration 4.14. Load Optimized Defaults CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software 4Standard CMOS Features 4Frequency/Voltage Control 4Advanced BIOS Features Load Fail-Safe Defaults 4Advanced Chipset Features Load Optimized Defaults 4Integrated Peripherals Set Supervisor Password 4Power Management Setup Set User Password Load Optimized Defaults (Y/N)? N 4PnP/PCI Configurations Save &...

  • Page 103: Set Supervisor/User Password

    6WXM 4.15. Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software 4Standard CMOS Features...

  • Page 104: Save & Exit Setup

    BIOS Configuration 4.16. Save & Exit Setup CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software 4Standard CMOS Features 4Frequency/Voltage Control 4Advanced BIOS Features Load Fail-Safe Defaults 4Advanced Chipset Features Load Optimized Defaults 4Integrated Peripherals Set Supervisor Password 4Power Management Setup Set User Password SAVE to CMOS and EXIT (Y/N)? Y 4PnP/PCI Configurations...

  • Page 105: Exit Without Saving

    6WXM 4.17. Exit Without Saving CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software 4Standard CMOS Features 4Frequency/Voltage Control 4Advanced BIOS Features Load Fail-Safe Defaults 4Advanced Chipset Features Load Optimized Defaults 4Integrated Peripherals Set Supervisor Password 4Power Management Setup Set User Password...
  • Page 106 Product Name: Mother Board residential installations. This equipment Model Number: GA-6WXM generates, uses, radiate radio Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), frequency energy, and if not installed and used...

  • Page 107: Declaration Of Conformity

    Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-6WXM is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive...

Table of Contents