Advanced Features - Panasonic KX-FG5642C Operating Instructions Manual

8.4 Advanced features

*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and
vice versa.
Feature
Setting the journal
report to print
automatically
Sending documents
overseas
Sending a fax at a
specified time
Setting the callers list
to print automatically
Activating the
Distinctive Ring feature
Feature code Selection
{0} "OFF": The unit will not print a journal report, but will keep a
{#}{2}{2}
record of the last 30 fax transmissions and receptions.
{1} "ON" (default): The unit will print a journal report automatically
after every 30 new fax transmissions and receptions (page 32).
If you cannot send a fax overseas even if the number is correct
{#}{2}{3}
and the line is connected, activate this feature before sending the
fax.
This feature improves the reliability by reducing the transmission
speed.
{0} "OFF": Deactivates this feature.
{1} "NEXT FAX": This setting is effective only for the next
attempted fax transmission. After transmission, the unit will return
to the previous setting.
{2} "ERROR" (default): When the previous fax transmission fails
and you wish to re-send the document.
Note:
L Calling charges may be higher than usual.
This feature allows you to take advantage of low-cost calling
{#}{2}{5}
hours offered by your telephone company. This feature can be set
up to 24 hours in advance of the desired time.
{0} "OFF" (default)
{1} "ON"
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to select the
desired resolution (page 32).
3. {MENU} i {#}{2}{5}
4. Press {1} to select "ON". i {SET}
5. Enter the fax number. i {SET}
6. Enter the transmission start time.
7. {SET} i {MENU}
Note:
L To cancel after programming, press {STOP} then {SET}.
{0} "OFF" (default): The callers list will not be printed
{#}{2}{6}
automatically, but the base unit will keep a record of the
information for the last 30 different callers.
{1} "ON": The callers list will be printed automatically each time
the base unit logs 30 different callers (page 27).
{0} "OFF" (default)
{#}{3}{1}
{1} "ON"
See page 39 for details.
L Press {*} to select "AM" or "PM".
L If you select French for the language (feature #48 on page
51), the time is set using a 24 hour clock.
8. Programmable Features
49