Feature
Changing the LCD
display contrast
Changing the fax
activation code
Setting the memory
reception alert
Setting friendly
reception
Selecting the language
Selecting the voice
*1
prompt
Changing the recording
time for your TAM/FAX
greeting message
Feature code
Selection
Base unit:
For the base unit display contrast only:
{1} "NORMAL" (default)
{#}{3}{9}
{2} "DARKER"
Cordless
For the cordless handset display contrast only:
handset:
{1} Level 1
{2} Level 2
{0}{1}
{3} Level 3 (default)
{4} Level 4
{5} Level 5
{6} Level 6
If you wish to use an extension telephone (page 36) to receive
{#}{4}{1}
faxes, activate this feature and program the activation code.
{0} "OFF" (default)
{1} "ON"
1. {MENU} i {#}{4}{1}
2. Press {1} to select "ON". i {SET}
3. Enter your code from 2 to 4 digits, using 0-9, {*} and {#}.
4. {SET} i {MENU}
To alert you with a beeping sound when a received fax document
{#}{4}{4}
is stored into memory due to some existing problem.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough paper
to print the stored document.
To receive a fax automatically when you answer a call and hear a
{#}{4}{6}
fax calling tone (slow beep).
{0} "OFF": You have to press {FAX START} for fax reception.
{1} "ON" (default): You do not have to press {FAX START} for fax
reception.
Base unit:
The display and reports will be in the selected language.
{1} "ENGLISH" (default): English is used.
{#}{4}{8}
{2} "FRENCH": French is used.
Cordless
The display will be in the selected language.
handset:
{1} "English" (default): English is used.
{2} "Français": French is used.
{0}{8}{1}
Base unit:
The voice guidance will be heard in the selected language.
{1} "ENGLISH" (default): English is used.
{#}{5}{0}
{2} "FRENCH": French is used.
Cordless
The voice guidance will be heard in the selected language.
handset:
{1} "English" (default): English is used.
{2} "Français": French is used.
{0}{8}{2}
{1} "16s" (default): Maximum recording time is 16 seconds.
{#}{5}{4}
{2} "60s": Maximum recording time is 60 seconds.
See page 42 for details.
L The default code is ";#9".
8. Programmable Features
51