Grundig Sonoclock 890 WEB Manual page 51

Ethernet
Primary DNS
255.253.251.250
SSID: grinternet
‹
0123456789 ⁄ C
Open
WEP
WPA
›
WPA2
SPECIAL SETTINGS
11 Use » « or »
Λ
DNS, and press »OK« to confirm.
– You are prompted to enter the SSID.
Note:
The SSID (Service Set Identifier) is the code of the WLAN
network, and is used to identify this wireless network.
12 Enter the SSID.
Notes:
Use buttons »
You can choose between numbers, lower and upper case letters,
and special characters.
Press » » « or » » » « to select the required character.
Press » « or »
Λ
letters, special characters, etc.). When the selected character
flashes, press »OK« to assign it to the SSID.
If you make a mistake during entry, select the » « character and
press »OK« to confirm. The last character is deleted.
To leave the menu without completing your entry, select the »C«
character and press »OK« to confirm.
Once you have entered the complete SSID, select the »
character and press »OK« to confirm. If you entered an incorrect
SSID, you will be requested to enter the web key again.
»Please wait Processing« now appears in the display. The
connection to the WLAN router and the internet is being built up.
If the device cannot connect to the router, »Connection failed«
appears in the display. If the connection was successful,
»Connected« appears in the display.
You can now select different encryption types:
»WEP« (»WEP« offers a choice between »Open« and
»PSK«).
»WPA« (»WPA« offers a choice between »TKIP« and »AES«).
»WPA2«: the highest security level (»WPA2« also offers
options »TKIP« »AES«).
Note:
The encryption settings of the device must match those of the
router.
------------------------------------------------------------------
« to enter the primary and then the secondary
V
«, » «, » » «, » « and »OK« to enter the SSID.
Λ V
« to scroll through the menu pages (numbers,
V
«
⁄
51