Registering The Device With The Wlan Router With Individual Settings In - Grundig Sonoclock 890 WEB Manual

›
Network setup
Time setup
Sleep
Alarms
Wizard
PC settings
View settings
›
Manual settings
DHCP enable
›
DHCP disable
Ethernet
IP address
193.169.99.220
Ethernet
Subnet mask
255.255.255.0
Ethernet
Gateway address
193.168.99.1
50
SPECIAL SETTINGS
Registering the device with the WLAN router
with individual settings in the network
These settings require advanced knowledge of the configuration of
networks.
1 Press »MENU« to open the menu of the current source.
2
Press » « or »
Λ
»OK« to confirm.
3 Press » « or »
Λ
»OK« to confirm.
4 Press » « or »
Λ
»OK« to confirm.
5 Press » « or »
Λ
press »OK« to confirm.
6 Press » « or »
Λ
press »OK« to confirm.
7 Press » « or »
Λ
press »OK« to confirm.
– You are prompted to enter the IP address(es).
Note:
Setting »DHCP disable« means you have to enter all addresses
manually. If »DHCP enable« is set, the addresses are automati-
cally assigned by the router. If you have selected »DHCP en-
able«, continue with step 12.
8 Use » « or »
Λ
confirm.
– You are prompted to enter the subnet mask.
Notes:
Use » » « to move to the next position.
The settings in steps
ration.
9 Use » « or »
Λ
confirm.
– You are prompted to enter the gateway address.
Note:
The device uses the gateway address to access the network.
10 Use » « or »
Λ
»OK« to confirm.
– You are prompted to enter the primary DNS.
Note:
The primary and secondary DNS (Domain Name System) are
the network address of the server made available by the provider.
------------------------------------------------------------------
« to select the »Main menu« option and press
V
« to select the »System setup« option and press
V
« to select the »Network setup« option and press
V
« to select the »Manual settings« option and
V
« to select option »Wireless« or »Wired« and
V
« to select the »DHCP disable« option and
V
« to enter the IP address and press »OK« to
V
9 to 11 can be found in the router configu-
« to enter the subnet mask and press »OK« to
V
« to enter the gateway address and press
V