Foot Control Use - Kenmore 385.101118 Owner's Manual

._,_.-_ -_ _X__'_- _,_< _._._';'_ _ :,_;;._ o,_-_.-.',_ ,.
. Plug in the Machine and Switch on the Power
f
Power
switch
\
\
\
Power supply plug
supply
NOTE:
Machine
socket
Machine
plug
Before inserting the plug into your
machine, be sure the power switch is
OFF.
1, Check your outlet to be sure it is a 110 to 120
Volt AC outlet.
2. Insert the machine plug into the three-prong
outlet, as shown. It wilt only fit one way.
3. Insert the power supply plug into the outlet.
,°..°,,<
4. Push the light and power switch to turn
on the power and sewing light,
SAFETY FEATURE:
Your machine will not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children.
Foot Control Use
_I-] .'; "- "" _-"
/
Foot control
J
The foot control regulates the speed at
which you sew.
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres-
sure slightly,
NOTE: The foot control is sensitive and
will increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.