Kenmore 385.101118 Owner's Manual page 14

• Wind the Bobbin (Continued)
f
Draw thread from spool through bobbin Pull end of thread through
winder tension disc as shown, bobbin as shown.
hole
in
Place bobbin onto bobbin winder
spindle with end of thread coming from
the top of the bobbin. Push bobbin
winder shaft to the right until it clicks.
Holding onto end of thread, start ma-
chine. When bobbin is slightly filled,
snip off end of thread.
Wind thread until winder stops. Remove
bobbin. Clip thread.
Tighten clutch knob.
12