Kenmore 385.101118 Owner's Manual page 16

• Thread Your Needle
(!) The numbered steps below follow the numbers on the illustrations.
Dotted lines show places where the thread loops and then is pulled
tight.
Raise thread take-up lever to its highest position by turning
hand wheel toward you. Raise presser foot lever. Place spool
on spool pin as shown, with thread coming from the back of
the spool.
f
7
1. Draw thread through thread 2. While holding thread near 4. Draw thread up & through
guide, spool, draw thread into take-up _ever.
threading channel toward
you making sure the thread
is pulled firmly between the
tension discs.
3. Draw thread down channel
and around the spring wire
as shown.
l&