Table of Contents
Advertisement
To remove
the crisper:
1. Slide crisper straight
out to the stop.
2. Lift the front of the crisper, then pull it out to remove.
3. Replace the crisper by sliding it back in fully past the drawer
stop.
To replace lattice on inner surface:
1. For each lattice
insert middle
tab in 1 (closed to glass cover)
and pull sides of the cover to insert lattice.
CRISPER COVER WITH LATTICE ON INNER SURFACE
(on some models)
To remove
the crisper cover:
1. Remove both crisper drawers.
2. While
holding the crisper cover support (2), pull the cover up
and out(l).
MODULAR
DOOR
BINS
The door
bins are removable
for easy
cleaning
and
adjusting.
1. To remove
the bin, simply
lift the bin up and
pull straight
out.
2. To replace
the bin, slide it in above
the desired
support
button
and push down until it stops.
[] WARNING:
Be careful
when handing
the glass cover since
the glass is not attached
to the cover.
To remove
the lattice on inner surface:
[] WARNING:
Injury could occur if door bins are not firmly
assembled.
NOTE:
DO NOT adjust a bin that is loaded
with food.
[] CAUTION:
DO NOT allow children
to play with the baskets.
Sharp corners on baskets could cause injury.
NOTE: Do not change
the location
of the lower bin in the
upper doors with the others, or the doors will not close
properly.
1. Remove crisper cover (as illustrated
above).
2. Hold the glass cover and overturn
the crisper cover.
3. For each lattice
hold the lattice and pull sides of the cover
outward
to remove lattice.
21
Hide quick links:
Advertisement
Table of Contents
