Kenmore BOTTOM FREEZER 795.713 Use And Care Manual page 11

HOW TO REMOVE REFRIGERATOR DOOR (CONT.)
2.Replaclng Refrigerator Door
!_ Right Door
• Lower the door onto the middle hinge pin (7).
° Make sure the door is aligned with the cabinet.
° Replace the top hinge (4) installing hinge screws (3) to secure it.
° Make sure the gasket on the door is flush against the cabinet
and is not folded.
° Support the door on the handle side while securing. And make
sure the door is straight and the gap between the doors is even
across the front.
° Install the ground screw (6).
° Connect the door switch wire (2).
° Tighten the cover screw (1).
!_ Left Door
° Lower the door onto the middle hinge pin (8).
° Make sure the door is aligned with the cabinet.
° Replace the top hinge (4) installing hinge screws (3) to secure it.
° Make sure the gasket on the door is flush against the cabinet
and is not folded.
° Support the door on the handle side while securing. And make
sure the door is straight and the gap between the doors is even
across the front.
° Connect the door switch wire (2).
° Tighten the cover screw (1).
NOTE: Make sure that the doors seal properly to ensure the
refrigerator runs emciently.
®
I
®
12