About Automatic Icemaker - Kenmore BOTTOM FREEZER 795.713 Use And Care Manual

Bottom freezer refrigerator
Table of Contents

Advertisement

ICEMAKER
PERSONAL
INJURY
HAZARD
Avoid contact
with the moving parts of the ejector
mechanism,
or with the heating
element
that releases the
cubes. DO NOT place fingers or hands on the automatic
icemaking
mechanism
while the refrigerator
is plugged
in.
OPERATION
iNSTRUCTiONS
NOTE: Automatic
Ice Maker
feature
is included only in certain
models. Please check your product
specification.
A newly=installed
refrigerator
may take 12 to 24 hours to
begin making
ice.
WHEN YOU SHOULD SET THE ICEMAKER POWER
SWITCH TO O (OFF)
° When the water
supply will be shut off for several hours.
* When the ice storage
bin is removed
for more than a minute
or two.
° When the refrigerator
will not be used for several days.
NORMAL
SOUNDS YOU MAY HEAR
The icemaker water
valve wiii buzz as the icemaker fills with
water. If the power switch is in the I (ON)
position, it will buzz
even if it has not yet been hooked
up to water. To stop the
buzzing,
move the power switch to O (OFF).
NOTE: Keeping
the power switch in the I (OFF) position
before the water
line is connected
can damage
the icemaker.
° You wiii hear the sound of cubes dropping
into the bin and
water
running in the pipes as the icemaker refills.
Switch
Arm
This type of icemaker wiii produce
twelve cubes per cycle
approximately
80 -100
cubes in a 24-hour
period,
depending
on freezer compartment
temperature,
room temperature,
number of door openings
and other operating
conditions.
If the refrigerator
is used before the water
connection
is made
to the icemaker, set the power switch to O (OFF).
When the refrigerator
has been connected
to the water
supply,
set the power switch to I (ON).
The icemaker will fill with water only when it cools to freezing.
A newly-installed
refrigerator
may take 12 to 24 hours to begin
making ice cubes.
Throw away the first few batches
of ice to allow the water
line
to clean
Be sure nothing
interferes with the sweep of the feeler
arm.
When the bin fills to the
level
of
the feeler arm, the icemaker
will stop producing
ice.
It is normal
for some
cubes
to be stuck
together.
If
ice is not used
frequently,
old
ice cubes
will
become
cloudy,
taste
stale,
and shrink.
PREPARING FOR VACATION
Set the icemaker power switch to 0 (OFF) and shut off the
water supply to the refrigeraton
If the surrounding
air temperature
wiii drop below freezing,
have a qualified
servicer drain the water
supply system
to prevent serious property
damage
due to flooding
from
ruptured
water
lines or connections.
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

795.7130 series

Table of Contents