Refrlgera|Or Sectlon; Refrigeratorshelves - Kenmore BOTTOM FREEZER 795.713 Use And Care Manual

REFRIGERATOR SECTION
REFRIGERATORSHELVES
The shelves in your refrigerator are adjustable to meet your
individual storage needs. These units are aii glass shelves.
IMPORTANT: Do not clean glass shelves with warm water
when they are cold. Shelves may break if exposed to sudden
temperature changes or impact, such as bumping. For your
protection, glass shelves are made with tempered glass, which
wiii shatter into small pebbiesized pieces.
NOTE: Glass shelves are heavy. Use special care when
removing them to avoid dropping them.
Adjusting Shelves
Remove shelves from the shipping position and place the
shelves in the position you want.
* To remove a shelf: Tilt up the front of the shelf in the
direction of (1) and lift it in the direction of (2). Pull the shelf
out.
* To replace a shelf: Tilt the front of the shelf up and guide the
shelf hooks into the slots at a desired height. Then lower the
front of the shelf so that the hooks drop into the slots.
NOTE: Make sure that shelves are level from one side to the
other. Failure to do so may result in the shelf failing or the
spilling food.
Sliding Out Shelves (optlonal on some models)
You can slide some glass shelves in and out of your refrigerator
as follows.
* To slide the shelf out, carefully puii front of shelf toward you.
" To slide shelf in, push shelf in until it stops.
To remove a sliding shelf from its metal frame:
1. Pull the shelf out to the stop position.
2. Tilt the front of the shelf up and pull it past the stop position.
3. Lift up the shelf to remove.
Replace the shelf by reversing the above steps.
Convenience Shelves (optlonal on some models)
* Folding Shelf: You can store taller items such as gallon
containers or bottles by simply sliding the shelf back.
19