Table of Contents
Advertisement
Setting up
Follow these steps to set up your Paragon 200 ready for use.
Plan the location of your
Paragon 200
Situate your Paragon 200 close enough to both
the phone and mains power sockets so that the
cables will reach.
Your Paragon 200 should be kept free of dust,
moisture, high temperature, vibration and should
not be exposed to direct sunlight. Do not stand
it on carpets or other surfaces which generate
fibres or place it in locations which prevent the
free flow of air over its surfaces.
Warning
The apparatus is designed to be operated in a
normal office or domestic environment where
the relative humidity does not exceed 75%.
It should not be used in bathrooms or near water.
Paragon 200 - Edition 4.3 – 26th Sept '00
1
Although optional we recommend fitting an
alkaline battery which will provide up to 25 hours
back-up and ensure your messages are saved
in the event of a mains power failure.
Ensure the Paragon 200 is disconnected from
the telephone line.
To fit the battery.
1
Lift the cover.
2
Insert one LR61 9V battery (not supplied).
The display indicates when the battery power is low.
If no battery is inserted, it remains on the display.
Insert back-up battery
2
Battery low warning
1
5
Advertisement
Table of Contents
