Table of Contents
Advertisement
To set your PIN
Press buttons in the order shown
Press and release until the display
Sel
shows SECURITY CODE.
The prompt says "Please enter your
OK
4 digit security code" and displays the
current PIN.
Enter the 4-digit PIN you want.
KEYPAD
OK
To confirm the PIN displayed.
When calling your Paragon 200 from another
phone, it allows two attempts to enter the
correct PIN. If this is not done, you hear the
message "Thank you for calling" and the
machine hangs up.
To switch on your answering machine
If you have forgotten to switch on your
answering machine
Ring your answering machine from
another phone
After 20 rings, your Paragon 200 will
automatically answer the call.
Your answering machine is now
HANG UP
switched on.
16
Paragon 200 - Edition 4.3 – 26th Sept '00
Please note
To play back messages
Ring your answering machine as
normal.
Press and release during the outgoing
message. The prompt says "Please enter
your 4 digit security code".
Use the keypad to enter your security
PIN
PIN. Wait to hear the confirmation
beep after each digit.
After the last digit, the prompt says
"You have X messages" and begins to
play them.
You can now control your answering
machine by pressing the appropriate
button on the keypad:
2
Play messages.
Skip back to previous message.
4
Delete the message being played
5
(or delete all messages at the end of
play back).
Skip forward to the next message.
6
Advertisement
Table of Contents
