Epson TM-C610 User Manual page 13

5. Push the ink cartridge gently into the cartridge holder, as shown
below.
6. Close the ink cartridge cover.
When the ink cartridge is installed for the first time, the
(Power) LED starts flashing, and ink charging starts. Ink
charging takes approximately 4 minutes. In the meantime, do not
turn off the printer or open the roll paper cover or the ink cartridge
cover. Doing so wastes ink significantly.
When ink charging finishes, the
flashing.
Note:
When the ink cartridge is installed for the first time, the printer uses ink to
prepare for printing (ink charging), therefore the first cartridge does not last
as long as subsequent ones do.
Cartridge yields vary based on such factors as type of item printed, print
settings, paper type, frequency of use, and temperature.
To insure print quality, some ink remains in the cartridge after the INK LED
comes on.
The ink cartridge contains 3 colors of ink. Even when one particular color is
specified, all 3 colors of ink are used for printing and for keeping the print
head in good condition. When the ink level of even one color comes to the
lowest limit, the printer stops printing.
(Power) LED stays on after
TM-C610 User's Manual 11
English