Connectors - Axis Q1615-E User Manual

AXIS Q1615-E Network Camera
Technical Specifications
Item
Function/group
Warranty
Axis 3-year warranty and AXIS Extended Warranty option, see www.axis.com/warranty

Connectors

I/O connector
4–pin terminal block for:
• 0 V DC (-)
• Auxiliary power (DC output)
• Digital Input
• Digital Output
Function
0 V DC (-)
DC output
Configurable
(Input or Output)
Setup example:
3.
I/O configured as input
4.
I/O configured as output
Specifications
AXIS Camera Station and video management software from Axis' Application
Development Partners
Pin Notes
1
2 Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3–4
Digital input – Connect to pin 1 to activate, or leave floating
(unconnected) to deactivate.
Digital output – Connected to pin 1 when activated, floating
(unconnected) when deactivated. If used with an inductive
load, e.g. a relay, a diode must be connected in parallel with
the load, for protection against voltage transients.
12 V max 50 mA
1
2 3 4
1
2
3
4
68
Specifications
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC, open drain,
100 mA