Status Led Behavior For Focus Assistant; Buzzer Signal For Focus Assistant; Status Led Behavior And Buzzer Signal For Levelling Assistant; Replace The Lens - Axis Q1615-E User Manual

AXIS Q1615-E Network Camera
Hardware Overview
LED Color
Housing Green
(fan and heater)
Flashing
green
Note
This status LED referred to in the table above is located in the housing.

Status LED Behavior for Focus Assistant

Color
Green
Amber
Red

Buzzer Signal for Focus Assistant

Buzzer
Fast interval
Medium interval
Slow interval

Status LED Behavior and Buzzer Signal for Levelling Assistant

For information on the Function button used for levelling the camera, see Connectors and Buttons.
Color
Fixed green
Flashing green
Flashing orange
Flashing red

Replace the Lens

It is possible to use optional lenses for the Axis product.
To replace the lens:
1. Disconnect the iris cable.
Indication
Normal operation.
Single flash: Heater error
Double flash: Fan error
Triple flash: General error
Alarm events will be triggered through the camera's input port.
Contact your Axis reseller for information about spare parts and troubleshooting.
Indication
Focus Assistant is enabled
The lens is optimally adjusted
The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the
Focus Assistant.
The lens is less optimally adjusted.
The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the
Focus Assistant.
The lens is poorly adjusted.
Buzzer
Continuous beep
Fast interval
Medium interval
Slow interval
Lens
Optimally adjusted
Less optimally adjusted
Poorly adjusted
10
Camera position
Level
Almost level
Not level
Far from level