Axis Q1615-E User Manual page 16

AXIS Q1615-E Network Camera
Access the Product
The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls on page 36.
Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.
User-defined buttons can also appear in the Control panel. See Controls on page 36.
To view a specific view area or preset position, select it from the Source list.
Focus bar – Click on a position on the focus bar to set the focus position. This will
disable the product's autofocus. To re-enable, use the PTZ control panel which is
opened by clicking the Ctrl panel button (see above).
Iris bar – Click on a position on the iris bar to change the degree to which the iris is
opened. This will disable the product's auto iris. To re-enable, use the PTZ control panel
which is opened by clicking the Ctrl panel button (see above).
16