Toshiba GA-1211 Easy Setup Manual page 69

8
Select each option according to the configuration of the printer,
and click [OK].
You will be returned to the screen containing the [Printers] list.
GA-1211 or GA-1211-EX
- Finisher Option
None — Select this option if a finisher is not installed.
Saddle Stitch Finisher + Hole Punch — Select this option when the Saddle
Stitch Finisher and Hole Punch Unit are installed.
Finisher + Hole Punch — Select this option when the Finisher and Hole Punch
Unit are installed.
Saddle Stitch Finisher — Select this option when the Saddle Stitch Finisher is
installed.
Finisher — Select this option when the Finisher is installed.
Hanging Finisher — Select this option when the Hanging Finisher is installed.
- Punch Option
Not Installed — Select this option when the Hole Punch Unit is not installed.
2 hole Punch — Select this option when the 2 Hole Punch Unit is installed.
2/3 hole Punch — Select this option when the 2/3 Hole Punch Unit is installed.
4 hole Punch Type E — Select this option when the 4 Hole Punch Unit (Type E)
is installed.
4 hole Punch Type NE — Select this option when the 4 Hole Punch Unit (Type
NE) is installed.
- Optional Trays
Not Installed — Select this option when no optional drawer is installed.
Drawer 3 Only — Select this option when Drawer 3 is installed.
Drawer 3-4 — Select this option when Drawers 3 and 4 are installed.
Large Capacity Feeder — Select this option when the Large Capacity Feeder is
installed.
- Spot-On Option
Not Installed — Select this option when the Spot-On option is not installed.
Spot-On — Select this option when the Spot-On option is installed.
- Auto-Trapping Option
Not Installed — Select this option when the Auto Trapping option is not installed.
Auto Trapping — Select this option when the Auto Trapping option is installed.
Installing the Printer Driver 67