Toshiba GA-1211 Easy Setup Manual page 44

2 INSTALLING THE PRINTER DRIVER (Windows)
1
Open the NetWare server (when using in bindery mode) or NDS
directory tree (when using in NDS or NDPS mode) in the Network
Neighborhood with the Windows Explorer, and double-click a
queue.
When using the NetWare 5.x in NDPS mode and the printer drivers for each Operat-
ing System are installed to a NDPS broker, the printer driver is automatically installed.
Unless using the NetWare 5.x in NDPS mode and printer drivers for each Operating
System are installed to a NDPS broker, the [Add Printer Wizard] dialog box appears.
Continue to the next step.
Select a queue depending on how you want to print.
- [given name]_print - print jobs are spooled to the hard disk in the printer and
- [given name]_direct - print jobs are sent straight to the printer without spooling.
- [given name]_hold - print jobs are held until users operate copying or moving
The queue names created on the NetWare server should be either "[given
name]_print", "[given name]_direct", "[given name]_hold" ([given name] can be any
name). Those queues correspond to the printer's queues, Print, Direct, and Hold.
2
Click [OK].
The [Add Printer Wizard] dialog box appears.
42 Installing the Printer Driver
printed out. Use this queue for general printing.
You cannot change the order of print jobs by moving them, which are sent to this
queue.
them to the Print queue with the job management tools.