Chapter 6 Ali M5281 Sata3/4 Driver Installation - SOYO SY-KT880 DRAGON 2 User Manual

ALI M5281 SATA3/SATA4 Driver Installation
ALI M5281 SATA3/SATA4 DRIVER
You can use your ALi M5281 (SATA3/SATA4) as
1. Normal IDE function.
2. RAID function. (RAID0, 1)
To use SATA3 and SATA4 as normal IDE, please do the following steps
1. Go to the CMOS setup
"Onboard SATA/PATA 3,4" to "Enable".
2. Go to the CMOS setup
BOOT DEVICE PRIORITY
3. Set the "First Boot Device" to "SCSI Card"
4. Install the ALi 5281 driver. See driver installation instruction below.
To use SATA3 and SATA4 as RAID controller, please do the following
steps
1. Connect 2 SATA hard disk on SATA3 and SATA4.
2. Go to the CMOS setup
"Onboard SATA/PATA 3,4" to "Enable".
3. Go to the CMOS setup
BOOT DEVICE PRIORITY.
4. Set the "First Boot Device" to "SCSI Card".
5. Press "Ctrl+A" when the Ali M5281 BIOS summary screen appears.
6. Create a disk array, check appendix A for create instructions.
7. Install the ALi M5281 driver. See driver installation instruction
below.
Chapter 6
INSTALLATION
SOYO COMBO Feature
BOOT CONFIGURATION SETUP
SOYO COMBO Feature
BOOT CONFIGURATION SETUP
85
SY-KT880 DRAGON 2
and set the
and set the