SOYO SY-KT880 DRAGON 2 User Manual page 107

1. Press 'Enter' key to activate this item. Then 64K, 32K, 16K, 8K, 4K items
appears at bottom of Main Menu.
2. Use '↑' '↓' to choose the stripe size.
2.2.5 Delete RAID Setting & Partition
1. Press 'Enter' key to activate this item. An 'E' flash cursor appears at the
'Drive Select Menu' for the user to choose defined array drive to be
deleted.
2. 'Data on RAID drives will be erased (Y/N)?' prompt message shows up to
confirm the user's selection.
3. Press 'Y' key, and then the data in drivers is destroyed.
Warning: Make sure the data in drives is no longer in use before deleting
RAID Array.
4. 'RAID array List" automatically updates itself.
2.2.6 Delete All RAID Setting & Partition
1. Press 'Enter' key to activate this item.
2. 'Data on RAID drives will be erased (Y/N)?' prompt message shows up to
confirm the user's selection.
3. Press 'Y' key, and then the data in drivers is destroyed.
Warning: Make sure the data in drives is no longer in use before deleting
RAID Array.
4. 'RAID array List" automatically updates itself.
2.2.7 Rebuild RAID Array
When a drive is replaced or BIOS detects a bad drive, use Rebuild RAID
Array to keep data coherency for RAID 1 and 0+1.
103