SOYO SY-KT880 DRAGON 2 User Manual page 59

BIOS Setup Utility
Setting
Primary AGP
Graphics
PCI
Adapter
Vlink 8X Disabled
Supported
Enabled
AGP Mode Control
Setting
AGP Mode 1X
2X
4X
Disabled
AGP Read
Synchronization
Enabled
AGP Fast Disabled
Write
Enabled
Graphics 32M
Aperture Size
64M
128M
256M
AGP Master 1 Disabled
W/S Read
Enabled
AGP Master 1 Disabled
W/S Write
Enabled
Fast Normal
Command
Fast
Ultra
Description
This item indicates if the primary
graphics adapter uses the PCI or the
AGP bus. The default AGP setting
still lets the onboard display work
and allows the use of a second
display card installed in an AGP
slot.
Increase system performance.
Description
This item allows you to choose the
AGP Mode.
Enabled/Disabled AGP read
synchronization capability.
Enabled/Disabled AGP fast write
capability.
This item defines an AGP for the
graphics. Leave this item at the default
value 64MB.
When Enabled, read to the AGP
(Accelerated Graphics Port) are
executed with one wait states.
When Enabled, writes to the
AGP(Accelerated Graphics Port) are
executed with one wait states.
Increase system performance.
55
SY-KT880 DRAGON 2
Note
Default
Default
Note
Default
Default
Default
Default
Default
Default
Default