Superio Configuration - SOYO SY-KT880 DRAGON 2 User Manual

BIOS Setup Utility

3-3.3 SuperIO Configuration

CMOS Setup Utility – Copyright (C) 1985-2002, American Megatrends, Inc.
Configure ITE8705 Super IO Chipset
OnBoard Floppy Controller
Serial Port1 Address
UART Mode Address
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F7:Previous Values
SuperIO Configuration
OnBoard Floppy
Controller
Serial Port
Address / UART
Mode Address
If [UART Mode Address] is set to [3F8/IRQ4 or 2F8/IRQ3 or 3E8/IRQ4 or 2E8/IRQ3]
UART Mode
Select
SuperIO Configuration
[Enabled]
[3F8/IRQ4]
[Disabled]
[378]
[Normal]
[IRQ7]
F8:Fail-Safe Defaults
Setting
Disabled Turn off the on-board floppy
controller
Enabled Use the on-board floppy
controller
Disabled
3F8/IRQ4 Choose serial port's I/O
address.
Do not set port to the same
address except for Disabled.
2F8/IRQ3
(recommend
for UART
Mode)
3E8/IRQ4
2E8/IRQ3
Standard Allows BIOS to select UART
Mode.
IrDA SIR
(recommend)
ASK IR
SY-KT880 DRAGON 2
Allows BIOS to Enable or
Disable Floppy
Controller.
F9: Optimized Defaults
Description
61
Item Help
Note
Default
Default
(UART
Mode)
Default
(Serial
Port)
Default