System Software; System Software Installation Reminders - Toshiba digital copiers Service Manual

3
3-22
Service Procedures

System software

The GA-1121 System Software CD includes system software to be installed over the
parallel port of the GA-1121.
The GA-1121 system software is installed in the HDD at the factory. You will need to
install system software if a more recent version is required, you replace the HDD, or if
you discover problems with the current system.

System software installation reminders

Keep in mind the following when installing system software:
• Job Log—Installing system software deletes the list of jobs in the Job Log and any jobs
in the queues. The network administrator at the customer site can save a current list of
jobs (not the actual job) from the Job Log using Fiery Spooler.
• Fonts—Installing system software deletes all fonts that the customer has installed on
the GA-1121. Only resident fonts will be restored during system software installation.
Fiery Downloader can be used to reinstall any additional fonts the customer may have
downloaded.
To determine which additional fonts were downloaded to the GA-1121, print the Font
List before you format the HDD and again after you complete the system software
installation. Any fonts not listed after installation will need to be reinstalled. See the
GA-1121 user documentation for more information.
• Language—Screens for installing system software installation are always displayed in
English, even if the copier is configured for another language.
• Compatibility—The latest user software must be installed onto all computers that
print to the GA-1121. Using incompatible versions of the system and user software
may result in system problems.