Restarting The Ga-1121 - Toshiba digital copiers Service Manual

2
T
O SHUT DOWN THE
T
O REBOOT THE
T
O RESTART THE
2-8
Using the GA-1121 Control Panel
GA-1121
1. Make sure that no jobs are being processed or printed (the activity light should be off).
2. Press the Menu button on the Control Panel to access the Functions menu.
3. Use the Down arrow to scroll to Shut Down. Press the Set button.
4. Use the Down arrow to scroll to Shut Down System. Press the Set button.
The activity light turns orange, and the message "Shutdown in progress" appears on the
Control Panel.
5. When the activity light turns off and the message "Safe to power off the system"
appears on the Control Panel, power off the copier using the main power switch.
After powering off the copier, wait at least three seconds before powering it back
N :
OTE
on.
GA-1121
1. Press the Menu button on the Control Panel to access the Functions menu.
2. Use the Down arrow button to scroll to Shut Down. Press the Set button.
3. Use the Down arrow button to scroll to Reboot System. Press the Set button.
The GA-1121 will reboot.

Restarting the GA-1121

Restarting the GA-1121 resets the GA-1121 system software, but does not reboot the
entire system. Network access to the GA-1121 is temporarily interrupted and all
currently processing jobs are aborted.
GA-1121
1. Press the Menu button on the Control Panel to access the Functions menu.
2. Use the Down arrow to scroll to Shut Down. Press the Set button.
3. Use the Down arrow to scroll to Restart Server. Press the Set button.
If an error occurs during startup, the activity light will turn red. Check the Control Panel
display for details of the error.