User Software - Toshiba GA-1040 Operator's Manual

xi User software
• Supports FreeForm (available as an option)
• With dongle installed, GA-1040 supports DocBuilder Pro
DocBuilder Pro is available in Windows only. See your copier representative for
details.

User software

A full set of user software is supported for the GA-1040.
Adobe PostScript
Printer Driver
PostScript Printer
Description file (PPD)
PCL6 Printer Driver
MRJ
(Mac OS only)
Fiery Link
Command WorkStation
software (available as an
option on a separate CD
for Windows OS only)
AGFA Monotype
Font Manager 2000
(for Windows, PCL
printer drivers only)
Enables you to print to the GA-1040 from
Windows 95/98/Me, Windows NT 4.0, and Mac OS
computers; also supports special Fiery and PostScript 3 features.
Windows 2000 users should use the Microsoft PostScript
Printer Driver provided with Windows 2000.
For use with the PostScript printer driver that allows the
GA-1040 to appear in popular applications' Print and Page
Setup dialog boxes. The GA-1040 PPDs provide information
about the GA-1040 and your particular copier model to the
application and printer driver you are using.
Enables you to print to the GA-1040 from Windows
computers; supports all special GA-1040 PCL6 print features.
Contains the Mac OS Runtime for Java installer v 2.2 and
associated files.
N : MRJ is required by all Java-based utilities, if MRJ is not
OTE
detected the MRJ installer is automatically launched.
Enables you to monitor the status of connected servers and the
print jobs sent to them.
Enables the operator to control the GA-1040 functions from
Windows 95/98/Me and Windows NT 4.0 workstations. To
use the Command WorkStation, see the Job Management Guide.
Enables you to manage your fonts on Windows, including
installing, uninstalling, organizing, and previewing TrueType
and Postscript Type 1 fonts.
Once installed, the software can be accessed with the Run Font
Manager button from the Print Quality tab in the PCL printer
driver.
™
(available as an option)