Manual Entry Transaction; Report - VeriFone Omni 3730 User Manual

MANUAL ENTRY TRANSACTION

This transaction is used in the event that the barcode or magnetic stripe on the license in not readable or available. If the F1 key to the right
of this display is depressed, the following is displayed:
LICENSE # ?
Enter the license number utilizing the ID3200 keypad. Follow the entry with a depression of the ENTER key.
DATE OF BIRTH (MMDDYYYY)?
This is displayed after the license number entry. Follow the entry with a depression of the ENTER key. (Please note that a four-digit year is
required). The age is computed and the same messages appear as for the MAG CARD transaction. The transaction is optionally saved.
Please note that the manual entry transaction does not perform any parsing on encoded data. It simply records the data entered and
computes age based on that information. It is for record keeping only to show law enforcement that the license was checked.

REPORT

This selection causes a batch report to be printed, which contains all the information saved for all transactions since the batch was last
deleted. To activate, depress the key directly to the right of REPORT. This causes the following to be displayed:
PRINT CHECK BATCH>
DISPLAY CHECK BATCH>
PRINT I.D. BATCH>
DISPLAY I.D. BATCH>
EXIT
The check batch is optional and described later in this manul. However, that logic is the same as for the I.D. batch. Depression of the key
below EXIT will cause the program to return to the main menu. Depression of the key directly to the right of PRINT or DISPLAY cause the
program to prompt for the report password. The default password is '111111'. Follow the password entry with a depression of the [ENTER]
key.
-5-