Folding/Unfolding - Horizon Fitness Core Series Owner's Manual

Hide thumbs Also See for Core Series:

Table of Contents

F O L D I N G Y O U R E L L I P T I C A L T R A I N E R

Note: It is important to always follow the correct order of steps when folding your elliptical trainer.

STEP 1:

The first step is to position the elliptical pedal arms in the proper position. The pedal arms

can be positioned in two different positions for convenience. The first position is to rotate the left

pedal arm so that it is in the backmost position (the left pedal arm wheel should be positioned at the

rear of the elliptical trainer). The second position would be to rotate the right pedal arm in the back-

most position.

STEP 2:

Carefully raise both the pedal arm (in the backmost position) and guide rail simultaneous-

ly.

STEP 3:

Press and hold the lock latch button located underneath the guide rail end cap. Align the

lock latch with the lock latch receiver located underneath the pedal arm. Insert the lock latch receiv-

er into the lock latch. Release the lock latch button once the lock latch is secure.

STEP 4:

Repeat process for alternate side.

U N F O L D I N G Y O U R E L L I P T I C A L T R A I N E R

Note: It is important to always follow the correct order of steps when unfolding your elliptical trainer.

STEP 1:

Firmly grasp both the left pedal arm and guide rail. Press and release the lock latch receiv-

er from the lock latch. Carefully lower the pedal arm and guide rail, standing to the side to avoid

any accidental release of the alternate pedal arm and guide rail.

STEP 2:

Repeat process for alternate side.

Core Series

Table of Contents