Child Lock - Zenith Z15LCD1 Installation And Operating Manual, Warranty

Operation
(1). Only when the Child Lock is ON, and the Channelock will be enabled; when the Child Lock Setup is OFF,
and the Channelock is disabled.
(2). Lock code: V-Chip password can be set up when the code is locked. Enter the 4-digit password which
you choose! The factory default password is 0000.
4. Sleep Timer: Set the sleeping timer and the alert function which indicates the time left.
5. Closed Caption (CC) setting: Select CC1~CC4, TXT1~TXT4 or OFF.
6. Reset to default: It is used to reset the OSD settings.
7. Note:If your ever forget your password,key in'3','4','4','8'on the remote control.
When the input source is in PC(only for 15) or Component mode, you can select Source OSD, Language,
Sleep timers and Reset to default; shown in the figure below:
Source OSD, Language, Sleep timer and Reset to default options are operated similarly as the above
instructions!

Child Lock

When you enter the Child Lock setting, a message on the display will prompt you to enter password,shown in
the figure below.
You can enter the Child Lock setting to set up the V-Chip level when you enter the correct password:
1. Age: it may be set to Child, Youth, Youth Adult, Adult only, Custom or Off; when you select Custom, it can be
set according to you preference.
20