External A/V Source Setup; Dvd Setup - Zenith Z15LCD1 Installation And Operating Manual, Warranty

External A/V Source Setup
External A/V Source Setup
Connections
Connect the audio/video output jacks on the
external A/V equipment to the corresponding
input jacks on the TV . When connecting the
TV to external A/V equipment, match the jack
colors (Video = yellow, Audio Left = white,
and Audio Right = red).
Viewing Setup
1. Turn on the external A/V equipment.
2. Use the TV/VIDEO button on the remote con-
trol to select Video .
3. Operate the corresponding external equip-
ment. Refer to external equipment operat-
ing guide.

DVD Setup

DVD Setup
Connections
1. Connect the DVD video outputs to the COMPONENT (Y, P
outputs to the AUDIO jacks.
2. If your DVD only has an S-V ideo output jack, connect this to the S-VIDEO input on the TV and con-
nect the DVD audio outputs to the AUDIO INPUT
NOTE: If your DVD player does not have component video output, use S-V ideo.
Viewing Setup
1. Turn on the DVD player , insert a DVD.
2. Use the TV/VIDEO button on the remote control to select
Component.
3. Refer to the DVD player's manual for operating instruc-
tions. (If connected to S-VIDEO on rear panel, select the
Video external input source.)
Component Input ports
To get better picture quality , connect a DVD player to
the component input ports as shown below.
Component ports
of the TV
Video output ports
of DVD player
Y P P
B R
Model
Y Pb Pr
Z15LCD1
R-Y
Y B-Y
Cr
Y Cb
Z20LCD1
P
Y P
R
B
External
Equipment
, P ) jacks and connect the DVD audio
B R
jacks on the TV .
Signal
480i/480p/720p/1080i
480i/480p
Installation
Camcorder
Video Game
set
R AUDIO L V IDEO
Y P P (R) AUDIO (L)
B R
Component
Yes
Yes
DVD
13