Table of Contents
Advertisement
External
External
A/V Source Setup
A/V Source Setup
Connections
Connect the audio/video output jacks on the external A/V
equipment to the corresponding input jacks on the TV.
When connecting the TV to external A/V equipment,
match the jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
Viewing Setup
1. Turn on the external A/V equipment.
2. Use the TV/VIDEO button on the remote control to
select Video.
3. Operate the corresponding external equipment. Refer
to external equipment operating guide.
DVD Setup
DVD Setup
Connections
1. Connect the DVD video outputs to the COMPONENT (Y, P
P
) jacks and connect the DVD audio outputs to the AUDIO
R
jacks.
2. If your DVD only has an S-Video output jack, connect this to
the S-VIDEO input on the TV and connect the DVD audio
outputs to the AUDIO INPUT jacks on the TV, as shown in
the figure.
NOTE: If your DVD player does not have component video
output, use S-Video.
Viewing Setup
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEO or MULTIMEDIA button on the remote
control to select Component 1 or Component 2 (If connect-
ed to S-VIDEO, select the S-Video input source.)
3. Refer to the DVD player's manual for operating instructions.
• Component Input ports
To get better picture quality, connect a DVD player to
the component input ports as shown below.
Component ports
of the TV
Video output ports
of DVD player
,
B
Y
P
P
R
B
Y
Pb
Pr
Y
B-Y
R-Y
Cr
Y
Cb
P
Y
P
R
B
1
External
Equipment
R
L
AUDIO
Y
Side Panel
(R)
AUDIO
Installation
Camcorder
Video Game set
VIDEO
1
P
P
(R)
AUDIO
(L)
B
R
DVD
(L)
Y
P
P
B
R
DVD
13
Advertisement
Table of Contents
